Key Features

1. Xeon® 3200/3000 Series, Pentium® D, Pentium 4, Pentium Extreme Edition, & Celeron D in LGA775 Package (FSB 1066/800/533)
2. Up to 8GB unbuffered ECC / non-ECC DDR2 667/533MHz SDRAM
3. 1 (x8) PCI-Express or  1x 64-bit 133MHz PCI-X
4. 1x Intel® 82573L PCI-e Gigabit LAN 1x Intel® 82573V PCI-e Gigabit LAN
5. On board ATI ES1000 Graphics
6. 2x 3.5"Hot-swap SATA Drive Bays
7. 300W Power Supply

Product SKUs SYS-5015M-T+ SuperServer 5015M-T+B(Beige) SYS-5015M-T+B SuperServer 5015M-T+B (Black)   Motherboard Super PDSMi+   Processor/Cache CPU Single LGA775 ZIF Socket Supports a Quad-Core Intel® Xeon® 3200 Series processor Supports a Dual-Core Intel® Xeon® 3000 Series processor Supports a Quad-Core Intel® Core™2 Extreme Series processor Supports an Intel® Core™2 Quad Series processor Supports an Intel® Core™2 Duo Series processor Supports a Dual-Core Intel® Pentium® D processor Supports an Intel® Pentium® Extreme Edition processor Supports an Intel® Pentium® 4 processor Supports an Intel® Celeron® D processor System Bus 1066 / 800 / 533 MHz system bus   System Memory Memory Capacity Four 240-pin DIMM sockets Supports up to 8 GB of memory (Single / Dual Channel) Memory Type DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs DIMM Sizes 256 MB, 512 MB, 1 GB, 2GB Memory Voltage 1.8 V only   On-Board Devices Chipset Intel 3000 (Mukilteo-2) chipset ICH7R + PXH-V + Intel® 82573V + Intel® 82573L Serial ATA Intel® ICH7R SATA controller built-in RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux) IPMI Support for Intelligent Platform Management Interface v.2.0 (Optional: AOC-IPMI20-E) Network Controllers 1x Intel® 82573V Gigabit PCI-Express Ethernet 1x Intel® 82573L Gigabit PCI-Express Ethernet Supports 10Base-T, 100Base-TX, 1000BASE-T, RJ45 output VGA On-board ATI ES1000 16MB graphics Super I/O Winbond 83627EHG chip Clock Generator CK410   Expansion Slots Universal Slot 1x 64-bit PCI-X 133MHz Slot (via Riser Card) OR 1 (x8) PCI-Express Slot (via Riser Card) - Optional   Input / Output Serial ATA Four Serial ATA ports (3 Gbps performance) Four SATA hard drives supported IDE One EIDE channel supports up to two UDMA IDE devices IDE Master / Slave 2 ports Supports UDMA Mode 5, PIO Mode 4, and ATA/100 White Connector for Compact Flash (CF, 40-pin IDE connector) card only Floppy 1 Floppy controller; 1.44 MB LAN 2x RJ45 LAN ports USB Up to 6x USB 2.0 compliant / 1.1 compatible ports 4x Internal USB headers 2x Rear USB ports VGA 1x VGA Port Keyboard / Mouse PS/2 keyboard and mouse ports Serial Ports 1x Fast UART 16550 serial port 1x Header Parallel Port 1x ECP / EEP Parallel Header Chassis Form Factor 1U Rackmount Model SC811T-300   Dimensions Height 1.7" (43mm) Width 16.8" (426mm) Depth 22.6" (574mm) Gross Weight 35 lbs (15.9kg) Available Colors Beige, Black   Front Panel Buttons Power On/Off button System Reset button LEDs Power LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Fail LED Ports none   Drive Bays Hot-swap 2x 3.5"SATA Hot-swap drive bays   System Cooling Fans 3x 3-pin Counter-rotatign Cooling Fans   Power Supply Fixed 300W AC power supply module with PFC [ 24-pin, (4-pin=12V), 4-pin HDD ] AC Voltage 100 - 240V, 60-50Hz, 5 Amp DC Output 5V + 3.3V ≤ 100W +5V 25 Amp +5V standby 2.0 Amp +12V 24.0 Amp (Max) -12V 1.0 Amp +3.3V 15.0 Amp   PC Health Monitoring CPU Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT) CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V Adjustable CPU clock frequency ratio FAN Fan Speed Control Total of six 4-pin fan headers 6x fans with tachometer monitoring Status monitor with firmware speed control Low noise fan speed control Status monitor for on/off control Support 3-pin fans (without speed control) Pulse Width Modulated (PWM) fan connector Temperature Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor (TM2) Support LED CPU / System Overheat LED +5V Standby Alert LED Suspend-state indicator LED Other Features Chassis Intrusion Detection Chassis Intrusion Header   System BIOS BIOS Type 8Mb Flash EEPROM with Phoenix BIOS® BIOS Features Plug and Play (PnP) DMI 2.3 support PCI 2.2 ACPI 1.0 USB Keyboard support SMBIOS 2.3

Parts List - (Items Included)   Part Number Qty Description Motherboard / Chassis MBD-PDSMi+-B CSE-811T-300(B) 1 1 Super PDSMi+ Motherboard 1U SC811T-300 Chassis (B = Black) Air Shroud CSE-PT97 1 Air Shroud Backplane CSE-SATA-810 1 2-Port SATA Backplane Cable(s) CBL-0051L CBL-0052L CBL-0056L CBL-0061L CBL-0099 1 1 1 2 1 23.6" Floppy Round Cable 23.6" IDE Round CD-ROM Cable SATA LED Cable (18", 10 Pin, LED, 1X5+1X5 Ribbon) 24" SATA Cable Power Extension Cable: one HDD to two HDD and two FDD Fan(s) FAN-0087 3 1U, 3-pin Counter-rotating Cooling Fan Hard Drive Carrier(s) CSE-PT10-(B)OEM 2 Hard Drive Carrier (B = Black) Heatsink / Retention SNK-P0016 1 1U, Pentium® D LGA775, Passive Heatsink I/O CSE-PT0119 1 Standard I/O Shield Mounting Rail(s) CSE-PT8 1 1U Chassis Mounting Rails and Kit Peripheral Drives FPD-PNSC-02(01) CDM-TEAC-24(B) 1 1 Panasonic 3.5" 1.44MB Floppy Drive (01 = Black) Slim 24x TEAC CD-ROM Drive (B = Black) Power Supply PWS-0054 1 SP302-1S 300W 1U power supply Riser Card(s) CSE-RR1U-Xi 1 1U 1-Slot PCI-X Riser Optional Parts List   Part Number Qty Description Riser Card (for PCI-e x8) CSE-RR1U-ELi - 1U Universal (SXB-E) Slot to PCI-E Slot Riser Card for PDSMi+