|
|
Supermicro 5013C-MT BB Server, 1U, MPGA478 Pentium 4, (4) SATA
|
Availability :
|
In Stock
|
| Item No : |
SYS-5013C-MT |
| |
| Price : |
$601.00
|
|
|
Product Description
Key Features
1. Intel® Pentium® 4 Support up to 3.4 GHz, Celeron® up to 2.4 GHz 2. Up to 4GB DDR 400/333/266 SDRAM 3. 1 x 64-bit 66MHz Full-height, Half-length PCI-X Expansion Slot 4. 1 x Intel® 82547GI CSA, 1x Intel® 82541 Gigabit Ethernet Controller 5. Intel® 6300ESB Serial ATA Controller 6. 4 x 3.5" Hot-swap Drive Bays 7. Marvell® Serial ATA Controller 8. 300W Power Supply
 |
| SYS-5013C-MT |
- SuperServer 5013C-MT (Beige)
|
| SYS-5013C-MTB |
- SuperServer 5013C-MTB (Black)
|
 |
 |
| CPU |
 |
• Single mPGA478 ZIF
Sockets
• Supports an Intel® Pentium® 4
processor with 2MB of integrated Advanced Transfer
Cache up to 3.4GHz (Extreme Edition)
• Supports an Intel® Celeron®
processor with 128KB of integrated Advanced
Transfer Cache up to 2.8GHz
• Hyper-threading enabled |
 |
| System Bus |
 |
800 / 533 / 400MHz
system bus |
 |
 |
 |
| Memory Capacity |
 |
• Four 184-pin DIMM
sockets
• Supports up to 4 GB of DDR400/333/266 memory
• Dual channel memory bus
• Memory must be populated in pairs |
 |
| Memory Type |
 |
DDR400/333/266
unbuffered ECC or non-ECC SDRAM, 184-pin
gold-plated DIMMs |
 |
| DIMM Sizes |
 |
128MB, 256 MB, 512 MB,
1 GB |
 |
| Memory Voltage |
 |
2.5 V only |
 |
 |
 |
| Chipset |
 |
• Intel® E7210 (Canterwood
ES) chipset
• MCH + 6300ESB + FWH |
 |
| Serial ATA |
 |
• Marvell® SATA
Controller chip
(4x Drive support)
• Six Serial ATA ports
• RAID 0, 10 Supported (for 4 HDD)
• RAID 0, 1 Supported (for 2 HDD) |
 |
| Network
Controllers |
 |
• 1x Intel® 82547GI
CSA Gigabit Ethernet Controller
• 1x Intel® 82541 Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T,
RJ45 output |
 |
| Graphics |
 |
ATI Rage XL SVGA PCI
video controller with 8MB of video memory |
 |
 |
 |
| • 1x
full-height, half-length 64-bit 133/100MHz PCI-X
(3.3V) expansion slot (Riser card required) w/ VXB
(Virtual Extended Bus) slot |
 |
 |
 |
| IDE |
 |
• Dual EIDE channels
support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
 |
| Floppy |
 |
1x Floppy controller;
1.44 MB, 2.88 MB, 3-mode support |
 |
| USB |
 |
• 2x USB 2.0 / 1.1
ports
• 1x USB header supports additional 2x USB 2.0 /
1.1 ports) |
 |
| Serial Ports |
 |
2x Fast UART 16550
serial ports |
 |
| VGA Port |
 |
1x VGA Port |
 |
| Parallel Port |
 |
1x ECP/EEP Parallel
Port |
 |
| LAN Port |
 |
2x RJ45 Ports |
 |
| Keyboard / Mouse |
 |
PS/2 keyboard and mouse
ports |
 |
|
 |
 |
 |
| Height |
 |
1.7" (43mm) |
 |
| Width |
 |
17.2" (437mm) |
 |
| Depth |
 |
19.8" (503mm) |
 |
| Gross Weight |
 |
38 lbs (17.2 kg) |
 |
| Available Colors |
 |
Beige, Black |
 |
 |
 |
| Buttons |
 |
• Power On/Off button
• System Reset button |
 |
| LEDs |
 |
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED |
 |
| Ports |
 |
• 2x Front USB Ports
• 1x Serial COM Port |
 |
 |
 |
| Hot-swap |
 |
4x 3.5"Hot-swap
SATA drive bays |
 |
 |
 |
| CDROM |
 |
1x 24x TEAC CDROM Drive |
 |
 |
 |
| 1x SATA813
1U Backplane w/o SAF-TE |
 |
 |
 |
| Fans |
 |
3x 4cm 12,500 RPM Fan |
 |
| |
 |
Fixed
300W AC power supply module with PFC
[ 24-pin, (4-pin=12V), 4-pin HDD ] |
| AC
Voltage |
- 100 - 240V, 60-50Hz, 5 Amp
|
| DC
Output |
|
| +5V |
|
| +5V
standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
 |
 |
| CPU |
 |
• Monitors for CPU
Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT
• CPU Core 3-Phase-switching voltage regulator
w/ auto-sense from 0.85V-1.65V
• Adjustable CPU clock frequency ratio settings
(via BIOS) |
 |
| FAN |
 |
• Total of five 3-pin
fan headers
• 3x fans with tachometer monitoring
• Status monitor with firmware/software on/off
control |
 |
| Temperature |
 |
• Monitoring for CPU,
chassis, environment
• CPU thermal trip support |
 |
| LED |
 |
• CPU Overheat LED
• System Overheat LED
• +5V standby alert LED
• Suspend-state indicator LED |
 |
| Other Features |
 |
• Chassis intrusion
detection
• Chassis intrusion header |
 |
 |
 |
| BIOS Type |
 |
4Mb Flash EEPROM with
AwardBIOS® |
 |
| BIOS Features |
 |
• Plug and Play (PnP)
• APM 1.2
• DMI 2.3 support
• PCI 2.3
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
• USB Keyboard support |
 |
|
|
|
 |
 |
 |
 |
 |
|
|
 |
 |
 |
 |
Part Number |
 |
Qty |
 |
Description |
 |
| Front
Bezel |
 |
CSE-PTFB-813(B) |
 |
1 |
 |
1U Chassis Front Cover
Bezel |
|
|
|
|
|
|