|
|
Supermicro 5035G-T Barebone BB Server, LGA775 Pentium4/Celeron, Mid-Tower, (4) SATA
|
Availability :
|
In Stock
|
| Item No : |
SYS-5035G-T |
| |
| Price : |
$533.00
|
|
|
Product Description
Key Features
1. Intel® Pentium® D, Pentium® 4 Extreme Edition, Pentium 4, Pentium Extreme Edition, & Celeron D in LGA775 Package(FSB 1066/800/533)
2. Up to 8GB dual channel unbuffered, ECC DDR2 667/533/400 SDRAM
3. 1 (x16) & 1 (x1) PCI-Express
2x 64-bit 133MHz PCI-X
3x 32-bit 33MHz PCI
4. 1x Intel® 82573V (Tekoa) PCI-e Gigabit LAN Port and 8x USB 2.0 ports
5. 4 x Hot-swappable SATA Hard Drive Bays
6. 450W Power Supply
 |
| SYS-5035G-T |
- SuperServer 5035G-T (Beige)
|
| SYS-5035G-TB |
- SuperServer 5035G-TB (Black)
|
| |
|
| CPU |
- Single LGA775 ZIF Socket
- Supports an Intel®
Pentium® D (Dual Core) processor
- Supports an Intel®
Pentium® Extreme Edition processor
- Supports an Intel®
Pentium® 4 processor
- Supports an Intel®
Pentium® 4 Extreme Edition processor
- Supports an Intel®
Celeron® D processor
- Hyper-Threading (HT) capable
|
| System
Bus |
- 1066 / 800 / 533 MHz system bus
|
| |
|
| Memory
Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of
unbuffered, ECC DDR2 667/533/400MHz memory
(Single / Dual Channel)
|
| Memory
Type |
- DDR2 667/533/400MHz unbuffered,
ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM
Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
| Memory
Voltage |
|
| |
|
| Chipset |
- Intel 955X (Glenwood)
- ICH7R + PXH-V + Intel® 82573V
|
| Serial
ATA |
- Intel® ICH7R SATA (3 Gbps)
controller built-in
- Host RAID 0, 1, 5, and 10
Support
|
| Network
Controllers |
- Single-port Intel® 82573V
Gigabit PCI-Express Ethernet (Tekoa)
- Supports 10BASE-T,
100/1000BASE-TX, RJ45 output
|
| Audio |
- AC''''97 audio CODEC with high
quality 6-channel sound
|
| Super
I/O |
|
| |
|
| PCI-Express |
|
| PCI-X |
- 2x 64-bit 133MHz PCI-X (3.3V)
slot
|
| PCI |
- 3x 32-bit 33MHz PCI (5V) slot
|
| |
|
| Serial
ATA |
- Four Serial ATA ports ( 3Gbps
performance)
- Four SATA hard drives supported
|
| IDE |
- One EIDE channel supports up to
two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode
4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB,
2.88 MB, 3-mode support
|
| LAN |
|
| USB |
- 8x USB 2.0 compliant / 1.1
compatible (6x ports + 2x headers)
- 2 in front (FUCI), 6 in rear
|
| Audio |
- 1x Line In / Line Out /
Microphone ports
- Front Panel Header
|
| Keyboard
/ Mouse |
- PS/2 keyboard and mouse ports
|
| Serial
Ports |
- 1x Fast UART 16550 serial port
- 1x Serial Header
|
| Parallel
Port |
|
| |
|
| BIOS
Type |
- 8Mb Flash EEPROM with AwardBIOS®
|
| BIOS
Features |
- User Over-Clock in System BIOS
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- BIOS rescue hot keys
- USB Keyboard support
|
|
 |
| |
|
| Height |
|
| Width |
|
| Depth |
|
| Weight |
|
| Available
Colors |
|
| |
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
| Ports |
- 2x Front side USB ports (USB
2.0 ready)
|
| |
|
| Hot-swap |
- 4x 3.5"Serial ATA hot-swap
drive bays
|
| Peripheral
Bay |
- 2x 5.25" peripheral drive
bay
- 1x 3.5" bay for floppy
drive
|
| |
|
| Floppy |
- TEAC 3.5" 1.44MB Floppy
Drive
|
| |
|
| Fans |
- 1x 12cm rear exhaust fan
- 1x 9cm mounted thermal cooling
fan
- 2x 8cm fans (450W power supply
configuration)
|
| |
|
| 4
x 3.5" SATA Backplane |
| |
|
| 450W
low-noise AC power supply with redundant cooling
feature (with PFC) |
| AC
Voltage |
- 100 - 240V, 50/60Hz, 10 Amp
|
| DC
Output |
- 5V + 3.3V ≤ 160W
- 12V1 + 12V2
+ 12V3 ≤ 34 Amp
|
| +5V |
|
| +5V
standby |
|
| +12V1 |
|
| +12V2 |
|
| +12V3 |
|
| -12V |
|
| +3.3V |
|
| |
|
| CPU |
- Monitors for CPU Cores, +1.5V,
+3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT
- CPU Core 4-Phase-switching
voltage regulator with auto-sense from
0.8375V-1.6000V
- Adjustable CPU clock frequency
ratio settings (via BIOS)
|
| FAN |
- Total of five 4-pin fan headers
- 5x fans with tachometer
monitoring
- Status monitor with firmware /
software speed control
- Support 4-pin PWM fan (with
speed control)
|
| Temperature |
- Monitoring for CPU and chassis
environment
- CPU thermal trip support
- Thermal Monitor (TM2) Support
|
| LED |
- CPU / System Overheat LED
- +5V standby alert LED
- Suspend-state indicator LED
|
| Other
Features |
- Chassis intrusion detection
- Chassis intrusion header
- Lead Free (not 100%)
|
|
|
|
|
 |
|
|
|
|
|
| |
Part
Number |
Qty |
Description |
| Motherboard
/ Chassis |
MBD-PDSGE-O
CSE-733T-450(B) |
1
1 |
Super PDSGE
Motherboard
Mid-Tower SC733T-450 Chassis (B = Black) |
| Cable(s) |
CBL-0051
CBL-0052
CBL-0056
CBL-0061 |
1
1
1
4 |
Floppy Cable
IDE CD-ROM Cable
SATA LED Cable
SATA Cable |
| Fan(s) |
FAN-0055
FAN-0060 |
1
1 |
120mm Rear
Exhaust Fan
90mm Front Fan |
| Hot-swap
Drive Tray |
CSE-PT39(B) |
4 |
Drive Tray for
SC733 & SC813 (B = Black) |
| Manual(s) |
MNL-0796 |
1 |
SW5035G-T
User''''s Manual |
| Peripheral
Drives |
FPD-TEAC(B) |
1 |
TEAC 3.5"
1.44MB Floppy Drive |
| Peripheral
Drive Bay(s) |
CSE-PT36-OEM(B) |
1 |
5.25"
Dummy Tray in SC742/942 Chassis Series |
| Power
Supply |
PWS-0045 |
1 |
SP450-RP 450W
Low Noise Power Supply |
| Rear
I/O |
CSE-PT37A |
1 |
I/O Shield |
| SATA
Backplane |
CSE-SATA-733 |
1 |
4 x 3.5"
SATA Backplane w/o SAF-TE |
|
|
|
|
|
| |
Part
Number |
Qty |
Description |
| Heatsink
/ Retention |
SNK-P0015A4 |
- |
• Active
Heatsink for 2U Chassis and above
• Please refer to our Thermal
Components Matrix |
|
|
|
|
|
|
